Electric needle sharpener and repair device, developed and manufactured by Ralph-Torsten Kolmer for needles with a diameter of 1.2 mm (e.g. Harder & Steenbeck 0.2 mm / 0.4 mm) Scope of delivery: Grind Tower with stand, a needle guide for needles with a diameter of 1.2 mm (suitable for 0.2 mm needles) and a sanding disc with 400 grit, a power supply unit and an additional sanding disc with 600 grit, tool for adjusting the height or depth stop of the sanding disc, the needle clamp for needle diameter 1.2 mm and operating instructions. The back of the defective needle is inserted into the needle clamping piece and then pushed into the stop. To increase the needle's resistance to damage, it is first ground blunt. Carefully push the needle into the guide provided and when the grinding noise occurs, slowly rotate the needle through 360 degrees several times until the grinding noise is reduced. The sealing cone of the needle is then ground. This is done on the other side of the needle guide plate and the grind tower must be rotated 180 degrees. The grinding process is similar here - grind again and rotate 360 degrees until the grinding noise is reduced. Finally, you should ideally polish the needle tip.German instruction video: 

Y-connectors as a set with plug, socket and plastic plug for connecting 2 airbrush units. Set 1: regular Y-distributor for connection to existing hose Set 2: Y-distributor with plug for oil piston compressor Set 3: Y-distributor with socket for oil-less small compressor  

30 x 22 x 0.3 cm, light green, self-healing, with printed grid and protractor, 310 g

The VsionAir Airbrush Station is an easel 2.0, so to speak: The basis of the modular system is a magnetic board to which templates or paper can be easily attached using magnets. The board stands on two rails on which it can be flexibly tilted and moved forwards and backwards. This allows it to be placed directly on the table. The base board is framed in a metal rail to which all kinds of practical items can be attached: Airbrush holders, cup holders, bottle and brush holders, a clipboard for templates, notepads or a tablet. The manufacturer's range also includes additional accessories such as a rig for installing lighting and a camera, a tripod stand for setting up the station freely, a table mounting set and other devices, e.g. for holding motorcycle parts, helmets, skateboards or guitars, which would otherwise be impractical to store and fix when painting. The ASBS Vsion Airbrush Station Basic Set contains: The airbrush station in A3 format2 airbrush holdersA combined reference and spray sample holderAn 80 mm organizer pot for pens, brushes etc. The ASBS Vsion Airbrush Station Advanced Set contains: The airbrush station in A3 format2 airbrush holdersA combined reference and spray sample holderAn 80 mm organizer pot for pens, brushes etc.A paint bottle holderA clean pot holder The sets offered here are intended as entry-level equipment that can be expanded as required. Further accessories are available directly from the manufacturer at www.vsionair.com. The illustration shows the option of the combined spray and reference holder. Each set comes with a combined spray and reference holder.

More flexible joints and more flexible suspension in contrast to conventional jointed dolls Female model PVC, skin color Height: 13 cm

Trigger Happy: Fatigue-free work and precise airbrush control. Retrofittable Trigger Happy Grip Sets, each consisting of a handle and lever attachment for upgrading the airbrush available in 2 models: Set A is suitable for Iwata Eclipse, Revolution and Neo airbrushes as well as various Paasche and Badger models, according to the manufacturer. In the editorial test, Set A was used, which also worked very well with Harder & Steenbeck airbrushes. Set B is suitable for Iwata Hi-Line, High Performance and Micron as well as Richpen, according to the manufacturer. The attachments are easily slipped on within a few seconds and securely enclose the components. The lever attachment can also be rotated to adjust the finger angle, and the significant increase in lever height allows for longer lever travel when adjusting the amount of ink. You can use the components together, but also individually. The thumb rests comfortably on the finger rest and can be rotated for excellent use by left-handed users. Both flow and suction systems can be converted with it. Placing it in an airbrush holder is also no problem. It only takes a brief moment to get used to the Trigger Happy. With many units, it actually seems surprising that you can now spray even finer. The Happy trigger components are made of polyurethane rubber, so even for allergy sufferers, the use of the airbrush device is thus much more pleasant.

Circle-like device with knife for cutting circular masks with a diameter of 10 to 150 mm diameter adjustable by means of adjusting screw  6 replacement blades included for replacement  two pencil tips included for exchange to draw circles

Precision knife with pointed, straight blade (type no. 11) and 5 replacement blades for detailed cutting of masks  

Handy device for repairing most available airbrush needles, e.g. the brands Iwata, Badger, Olympus, Grex, Harder & Steenbeck, Master, Sata, etc. Excluded: Paasche and DeVilbiss Dagr. For bent and damaged needle tip In four openings, the needle is ground into shape by manual rotation with diamond grinding stones of different grain (2 x 600, 2 x 1200) and different angles. A 3000 grid polishing pad for the perfect finish is included.